KGK CCS3000L, Инструкция по эксплуатации, Страница: 22 / 62

22
Before use
1
Head (appearance and inside)
No. Name Description
1 Printhead cover Upper cover of the printhead
2 Lens Can observe ink droplet condition.
3 Head cover tip cap
When the head cover will not open due to the solidified ink, you can take this
out for cleaning with the solvent.
When attach the cap into the head cover, note the orientation of the cap.
If attach the cap in the opposite orientation, can not mount the head cover
correctly.
4 Head filter Filters out impurities from ink.
5 Piezo -
6 Heater Heats up to a designed gun temperature.
7 Gun -
8 Gutter Collects ink.
9 Nozzle Ejects pressurized ink.
10 Nozzle plate Fixes the nozzle packing for nozzle capping.
11 Nozzle ejection port Ejects pressurized ink.
12 Charge electrode Charges ink droplets at a voltage depending on the amount of deflection.
13 Detection electrode Detects charged ink droplets.
14 Deflection electrode Applies a high voltage to deflect ink droplets.
15 Slide unit -
16 Slide screw -
17 Slide shaft -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17