11
Cleaning Instructions
RECOMMENDED CLEANING (CONTINUED)
PART
REQUIRED ACTION
FREQUENCY
Char Grate
Back
Support
Brace
Once the unit has cooled, remove the cast iron grates Lift the
support brace up off of the back splash guard.. Clean and
de-grease/remove debris from char grate back support brace.
Once the char grate back support brace is clean, reinstall it back
into place.
Daily or as need
Catch Tray Once the unit has cooled, remove the catch tray and discard the
waste, grease/debris and crumbs. CAUTION: If the catch tray is
permitted to fill too high, grease/debris is likely to accumulate under
the unit. The catch tray/drawer is removed by pulling forward.
USE
CAUTION WHEN REMOVING!
per Use or at least
Daily
Burner Air
Shutter
Openings
Main burner ports must be kept clean. Close the gas valve to the
unit, shutting off the gas and extinguishing the pilot light. Clean in
place with a wire brush, or clean gas ports with a sharp-pointed
metal instrument to insure open ports; or the burners may be
removed and washed in soapy water for 15-20 minutes.
As needed
Regulator
Make sure the vent is open and not blocked in any way. Failure to
do so will cause variations in pressure. Your unit will not function as
well and it could shorten the life of the product.
Monthly
