Installation
Choosing The Right Location
Your installation location should meet the following requirements:
-Make sure that you install your unit on an even surface to minimize
noise and vibration.
-The unit must be installed near a grounded plug, and the Collection
Tray Drain (found on the back of the unit) must be accessible.
-The unit should be located at least 30cm (12”) from the nearest wall
to ensure proper air conditioning.
-DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the
unit, as this could cause damage to the unit.
Note About Fluorinated Gasses
-This air-conditioning unit is a hermetically
sealed unit that contains fluorinated gasses.
For specific information on the type of gas and
the amount, please refer to the relevant label
on the unit itself.
-Installation, service, maintenance and repair of
this unit must be performed by a certified
technician.
-Product uninstallation and recycling must be
performed by a certified technician.
-If the system has a leak-detection system
installed, it must be checked for leaks at least
every 12 months.
-When the unit is checked for leaks, proper
record-keeping of all checks is strongly
recommended.
NOTE:
All the illustrations in the manual are for explanation
purpose only. Your machine may be slightly different.
The actual shape shall prevail.
The unit can be controlled by the unit control panel alone or
with the remote controller. This manual does not include
Remote Controller Operations, see the <<Remote Controller
Instruction>> packed with the unit for details.
6
