The Line Monitor Spool creates a file where information from the Keyspan Manager's Line
Monitor will be stored. You can turn this option on or off.
The Line Monitor Hold command will stop the Keyspan Manager from spooling the Line
Monitor data. Deselecting this option will resume the collection of Line Monitor data.
The Disable Printer Emulation command will disable Printer port emulation on ALL Keyspan
Mini Port Replicators connected to your computer. Deselecting this option will allow Printer port
emulation on any Keyspan Mini Port Replicator connected to your computer.
The USE INT Endpoints as Default command will make ALL Keyspan Mini Port Replicators
connected to your computer default to use INTERRUPT endpoints (for better performance at
high baud rates).
The Assume CTS ON command will force ALL Keyspan Adapters connected to your computer to
assume that the CTS signal is ON (or HIGH) when CTS is not specified by your serial device's
software or serial cable.
Note: This option is DISABLED on the Keyspan High Speed USB Serial
Adapter and Keyspan Mini Port Replicator
.
Keyspan:Mini Port Replicator for Mac OS-v2.6 User Manual
This User Manual applies to the Keyspan Mini Port Replicator Software for Mac OS.
(rev 02jun20JA)
Page 17
