KeySonic ACK-540 RF, Руководство по эксплуатации

Страница: 10 / 20

Operation Manual ACK-540 RF
E&OE
- 8 -
2. Installation
2.1 System Requirements
This keyboard requires a PC with USB connection and one of the following operating systems:
Windows 98SE / ME /2000 / XP / Vista
For the installation of the keyboard under the mentioned above operating systems you need
NO
special
driver!
2.2 Installation of the USB receiver
In order to install your keyboard, please perform the following steps:
•
Connect the included USB receiver (dongle receiver) to a free USB port
on your computer.
Advise: Please ensure, that the USB receiver has a minimal distance of
20 cm to metallic dividing walls, other computer cases, monitors, ZIP
drives, loudspeakers and switching power supplies.
•
All state-of-the-art operating systems with
Plug & Play
support will
recognize your keyboard automatically and load the required drivers.
During the phase of installation your operating system informs you via
changing Pop-up information windows on the task-bar about the current status of installation. Please be
patient, until the system informs you finally about the successful installation. The USB receiver is now
ready for operation.
Older operating systems not always support automatic recognition of USB or PS/2 devices. If you have
attached your USB receiver and exactly this error occurs on your system, you have the following alternatives
to solve the problem:
•
Perform an update of your operating system and return to Step 2.2
•
In some cases the installation CD of your operating system is necessary according to the instructions on
your screen. In this circumstance please follow these instructions
*
.
•
Check whether your
BIOS
system supports USB keyboards
*
. Some main board manufacturers offer
BIOS
updates for download over the Internet.
•
Ensure in your system settings, that the used USB connection was not deactivated in your operating
system
*
.
•
Should your system-updates keep out of success, it is recommendable to test the keyboard with another
PC with the same operating system to rule out a hardware damage of the USB receiver.
*
Please refer details to the manual of your PC.