6 Installation Guide
Introduction
Initial Inspection
Topics covered:
—
“Initial Inspection” on page 6
—
“Overall System Connections” on page 8
—
“Installation Procedure” on page 9
—
“Protecting Against Electrostatic Discharge” on page 20
—
Initial Inspection
Inspect the shipping container and the cushioning material for signs of stress.
Retain undamaged shipping materials for future use, as you may wish to ship
the test set to another location or to Keysight Technologies for service. Verify
the contents of the container against the table below.
Item
Picture or Description
Notes
Diplexer (qty 2),
Part# E7515-61192
Qty 2
Diplexer Bracket (qty 2),
Part# E7515-00165
Qty 2
RF Cable,
Part # E6610-60005
Cables for connecting two-port side of diplexer to
M1749B
HFLEX BL CA SM/SM 6-inch
(qty 4)
RF Cable,
Part# E7515-60025
Cables for connecting E7515B rear panel LO/CLK
ports to one-port side of diplexer, and also to 1st
M1749B
3.5mm (male) - 3.5mm (male); 4m
length (qty 3)
RF Cable
Part# M1740-60006
Cables for connecting M1749B IF I/O ports to
E7515B front panel RF ports
SMA(M)-TypeN(M), 4000mm LG
(qty 4)
Test Cable
Part# ZA0047-63001
Cable for connection first M1749B to second
M1749B (shared 9.6 GHz reference)
FLEX CA SM/SM 1M, 50ohm, DC
to 18GHz (qty 1)
Screws
Part# 0515-2028
Screw-Machine with Patch-Lock
90-DEG-Flat-HD Torx-T8 M2.5X0.45 6mm-LG
SST-300 Passivated
Qty 4
Screws
Part# 0515-2032
Screw-Machine W/Patch-Lock 90-DEG-Flat-HD
Torx-T10 M3X0.5 8mm-LG SST-300 passivated
finish
Qty 8
Содержание Y1301A
Страница 4: ...4 ...