16 Keysight WLAN Measurement Guide
Making WLAN Measurements
Introduction
Introduction
This chapter provides measurement procedures and also shows example
results obtained using the WLAN measurement application.
There are eleven measurements available in this mode:
—
Channel Power
—
Occupied Band wid th (OBW)
—
Power Stat CCDF
—
Spectrum Emission Mask
—
Spurious Emissions
—
Power vs Time
—
Spectral Flatness
—
Modulation Analysis
—
List Sequence (MXA/EXA with Option B40 only)
—
Monitor Spectrum
—
I/Q Waveform
Before you can begin making measurements, make sure you have installed
the required license.
1. Press
Mode
, and check to make sure that
WLAN
is available.
2. Press
Meas
, and check to make sure that all the measurements are
available.