Getting Started
1
Keysight U2040 X-Series User’s Guide
29
Static IP mode (configuring the LAN manually)
In static IP mode, you must set up the IP address, subnet mask, and default gateway that
are compatible with your network infrastructure (PC configuration).
Using a static IP address is useful if you always want to communicate with the instrument
using the same IP address every time it is turned on.
Figure 1-11
Connect the U2049XA via Static IP
1
Set up the connection as shown above.
2
On your PC, set the LAN settings to the automatic configuration. Go to
Start
>
Control
Panel
>
Network and Internet
>
Network and Sharing Center
>
Local Area Connection
>
Properties
and set the following properties.
NOTE
After configuring LAN settings, you must first power cycle the U2049XA. This enables the
new network settings to become effective.
PoE injector
U2049XA