4
Changing the Default Settings
70
Keysight U1211A, U1212A, and U1213A User’s and Service Guide
Setting Data Hold/Refresh Hold mode
To enable the data hold mode (manual trigger), set this parameter to OFF.
To enable the refresh hold mode (automatic trigger), set the variation count within
the range of 100 to 1000 in a step of 100. Once the variation of the measured
value exceeds this preset variation count, the refresh hold mode will be ready to
trigger and update a new value.
Figure 4-3
Setting the data hold or refresh hold mode
Press
Press
Press
or
to
edit the value at a
step of 100
Press
Press
Содержание U1211A
Страница 1: ...Keysight U1211A U1212A and U1213A Clamp Meters User s and Service Guide ...
Страница 10: ...10 Keysight U1211A U1212A and U1213A User s and Service Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 14: ...14 Keysight U1211A U1212A and U1213A User s and Service Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 18: ...18 Keysight U1211A U1212A and U1213A User s and Service Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...