1
Introduction
34
Keysight U1190A Series User’s Guide
Display screen
The display annunciators of your clamp meter are described in this section. See
on page 35 for a list of available measurement signs
and notations.
General display annunciators
The general display annunciators of your clamp meter are described in the table
below.
Table 1-5
General annunciators
Legend
Description
Learn more on:
Hazardous voltage sign for measuring voltage
≥
30 V or overload
Hold enabled
Auto-ranging enabled
-
Maximum reading shown on primary display
Minimum reading shown on primary display
Averaged reading shown on primary display
Present reading shown on primary display
Relative (Null) enabled
Diode test selected
Audible continuity test selected
DC (direct current) indication
and
AC (alternating current) indication
and
Battery capacity indication
APO (Auto Power-Off) enabled
Содержание U1190A Series
