20
Installation Note N9048-90017
Option EXM, External Mixing Upgrade Kit
5.
Connect one end of W29 to the SMA female connector as shown in
.
6.
Orient W29 so that the cable slopes upward from the Ext Mixer connector at a 15 degree
angle. The top of the connector should be approximately level with the top of the shield over
the Front Panel Interface board. Refer to
. Torque the cable nut on the Ext Mixer
connector to 10 inch-pounds.
Figure 16
Connecting W29 to Ext Mixer Connector
Figure 17
Proper Orientation of W29