Installation Note N9038-90018
9
Option HL4 - High Performance Digital Signal Processing Upgrade
Instrument Dress Cover Removal
2.
Turn the instrument off and remove the ac power cord.
3.
Refer to
. Using the T-20 driver, remove the four screws
(1)
that attach the strap
handles
(2)
to each side of the instrument.
4.
Remove the four bottom feet and locks
(6)
by lifting the tabs on the feet and sliding them to
disengage from the outer case.
5.
Using the T-20 driver, remove the four screws and washers
(3)
that hold the four rear feet
(4)
in place.
6.
The instrument dress cover
(5)
can now be removed by pulling it off to the rear of the
instrument.
Figure 2
Instrument Dress Cover Removal
If the instrument is placed on its face during any of the following procedures, be sure to use a soft
surface or soft cloth to avoid damage to the front panel, keys, or input connector.