Installation Note
N9030-90045
21
Option BBA, Analog Baseband I/Q Inputs Retrofit Kit
Install the BBIQ Coax Cable
and cable labels in the kit.
2. Label one end of the cable with marker 707 and the other end with 101.
3. Remove the wire cable holder from the side frame.
for cable routing diagram.
5. Install the “707” end of the
cable to J707 on the Reference board.
6. Route the cable as shown under the attenuator brackets.
7. Install the “101” end of the
cable to J101 on the BBIQ Main board.
8. Replace the wire cable holder. Assure the cables are routed to avoid pinching when the top brace is
re-installed.
Figure 15
W35 - BBIQ Coax Cable Location