Installation Note N9020-90257
5
Option BBA, Analog Baseband I/Q Inputs Retrofit Kit
Tools Required
— T-10 Torx Driver
— T-20 Torx Driver
— 5/16-inch torque wrench
— 1/4-inch socket on 4 lb torque wrench
— scissors or knife
— diagonal cutters
— USB storage device with > 2 GB free memory
Keysight Service Center
The following kit items will not be installed in the analyzer upgrade and need to be shipped back to
the end user for their use:
— 5063-2143, Probe tip BNC adapter
— 8120-2682, cable
— Entitlement Certificate
Before you disassemble the instrument, turn the power switch to Standby and unplug the
instrument. Failure to unplug the instrument can result in personal injury.
Electrostatic discharge (ESD) can damage or destroy electronic components. All work on
electronic assemblies should be performed at a static-safe workstation. Refer to the
documentation that pertains to your instrument for information about static-safe workstations
and ordering static-safe accessories.
