Installation Note N9010-90072
13
Option MTU and MTP, MultiTouch User Interface Upgrade Kits
Replacing Solid State Drive (SSD) - N9010A-MTU Upgrade Only
The steps in this section apply only to N9010A-MTU upgrades, where the solid state drive is
replaced. If the N9010A-MTP upgrade is being performed, skip to"
1.
Turn off the instrument and remove the AC power cord.
2.
. Locate and remove the existing disk drive carrier assembly
(2)
from the
instrument by loosening the rear panel screw
(1)
.
Figure 3
Replacing the Disk Drive Carrier Assembly