Making Quad-adapter Connections on the
Keysight
N7744/45A
Multiport
Power Meter
Figure 21
Connecting Optical Fibers
N O T E
Before you attach a quad-adapter or fiber, you should make sure they are clean.
This is important for accurate measurements.
The fibers do not contact the optical inputs (all contact with the optical inputs should
be avoided). Usually the only cleaning necessary for the optical inputs is the gentle
removal of dust with pressurized, dry air.
For further information, refer to "Maintenance and Troubleshooting" section,
described in this manual.
To use a quad-adapter to connect optical fibers to the power meter
inputs:
1
Select the quad-adapter that suits the optical connector that your
optical fiber is terminated with.
2
Attach the optical connectors to the quad-adapter. You can attach
up to 4 fibers to the quad-adapter at the same time.
3
Make sure the number labels on the quad-adapter are at the top.
4
Connect the quad-adapter to the optical inputs by pressing it on until
it clicks securely into place without pressing the release levers.
1
Getting Started
30
Keysight
N77xx Series
Содержание N77 Series
