Keysight N2818, Руководство пользователя

Страница: 17 / 46

Keysight N2818/9A Differential Probes User Guide 17
Using the Probe
Single and Variable Pitch Signal Pins
Insert the single signal pins into the probe tip as shown in Figure 10 .
Directly probing with these pins results in the best possible signal integrity
when compared to the other probing accessories.
Figure 10 Signal Pins Inserted into the Probe Tip
Figure 11 shows the variable pitch pins inserted into the probe tip. Gently
rotate the pins to change the distance between the pins.
Figure 11 Variable Pitch Pins Inserted into the Probe Tip
CAUTION
This probe is designed to perform differential measurements between
two points on the circuit under test. This probe is not for electrically
insulating the circuit under test and the measuring instrument.
NOTE
The single signal pins are symmetrical. Either end of the pin may be
inserted into the probe tip.