Keysight M9502A, Руководство пользователя

Страница: 11 / 142

M9502A/M9505A AXIe Chassis
User Guide
1
1 Introduction
This chapter provides a brief introduction to the AXIe chassis.
AXIe Chassis Description 2
M9502A 2-Slot AXIe Chassis at a Glance 4
M9505A 5-Slot AXIe Chassis at a Glance 6
AXIe Embedded System Module (ESM) 8
AXIe Instrument Modules 10
ESD Precautions 11
Power-Up and Power-Down 12
Safety-Related Specifications 17
Related Documentation 19
Product Warranty 19
A NOTE calls the user’s attention to an important point or special information in
the text. This version of the M9505A/M9502A User Guide supports and describes
features of the chassis firmware revision 1.3.23 (and later). This version of
firmware adds features that were not available in previous firmware versions.
These features include, but are not limited to the following:
- Support for E-Keying (see “Module Configuration Page” on page 47)
-
Fan speed adjustable from 35 to 100 (previously it was 8 to 15) (see “Chassis
Health Page” on page 53 and the notes concerning “Configure Fan Control”
on page 54)
- Ability to force the ESM to PCIe Gen 1 speeds (see “Embedded System Module
(ESM)” on page 114)
To identify the chassis firmware revision, see “Home Page” on page 44
To update chassis firmware, IVI driver (including Soft Front Panel), and LabVIEW
driver, and get the most up-to-date documentation, refer to the Keysight AXIe
chassis web pages:
www.keysight.com/find/M9502A or www.keysight.com/find/M9505A
To update IO Libraries Suite, go to: www.keysight.com/find/iosuite . IO Libraries
Suite version 16.3 update 1 (or later) is required for multiple chassis operation.
Always use the latest version of chassis firmware, IVI and LabVIEW drivers, and
IO Libraries Suite to get the best performance and latest features.