Keysight M9502A, Руководство пользователя

Страница: 22 / 142

12 Keysight M9502A/M9505A AXIe Chassis User Guide
Introduction Power-Up and Power-Down
Power-Up and Power-Down
Circuit Breaker
The chassis circuit breaker is a toggle switch, marked OFF (O) when open and ON
(I) when closed:
ON/STANDBY Switch
The chassis’ button on the front of the chassis is the
ON/STANDBY
switch, lit when
the chassis is ON:
Power Modes
The chassis has three power modes:
OFF
With the power cord removed or the circuit breaker in the open position,
the chassis is OFF .
STANDBY
With the power cord connected, the circuit breaker closed, and the
front panel switch in the standby (not depressed) position, the chassis is in
STANDBY
mode. Although no power is supplied to the ESM and installed modules
when in Standby, the chassis is energized and consumes power. Fans may
operate.
ON
With the power cord attached, circuit breaker closed, and the front panel
switch in the
ON
(depressed) position, the chassis is
ON
. Power is supplied to the
ESM and installed modules. Fans will operate as dictated by chassis thermal
load.
Circuit Breaker Open (OFF)
Circuit Breaker Closed (ON)
STANDBY
(off if power is disconnected
or breaker is open)
ON