Keysight M9380A, Руководство для стартапов

Страница: 25 / 40

Step 4: Install the Modules
M9301A PXIe Synthesizer Front Panel Features
For parameter limits and specifications on the M9301A connectors, see "M9380A Block Diagram Reference Table
for M9301A" on page 28 .
Connector Description
100 MHz BP Out This SMB male connector outputs a 100 MHz signal from
the chassis backplane.
100 MHz In This SMB male connector inputs a 100 MHz reference and
clock signal from the 100 MHz Out connectors of the Key-
sight M9300A PXIe Frequency Reference.
100 MHz Out This SMB male connector outputs the 100 MHz Reference
signal to the Keysight M9310A PXIe Source Output 100
MHz In connector.
Trig 1 This SMB male connector accepts the External Input Trig-
ger.
Trig 2 This SMB male connector is the List End Output Trigger.
Sync This connector is intended for future use.
RF/LO Out 1A, 1B,
2A, 2B
These SMA female connectors (1A and 1B) are used to
provide the RF In signal to the Keysight M9310A PXIe
Source Output. Connectors 2A and 2B are intended for
future use. Unused connectors should be terminated with
the provided 50 Ω loads.
Keysight M9380A PXIe CW Source
25