Keysight M8121A Скачать руководство пользователя страница 4

Страница: 4 / 144

Keysight M8121A Arbitrary Waveform Generator User Guide

Laser Safety Information

Class 1 Laser product according IEC60825-1 (2007).

ESD Sensitive Device

All front-panel connectors of the M8121A are sensitive to Electrostatic discharge (ESD).

There are also several exposed components on the PCAs, on both sides of M8121A, which

can be touched accidentally while handling the unit and can risk damage to the

instrument, due to ESD. It is recommended to operate the instrument in an electrostatic

safe environment. There is a risk of instrument malfunction when touching a connector or

side components. Please follow this instruction described in the “ESD Protection” section

under “M8121A Maintenance”.

Environment Conditions

This instrument is intended for indoor use in an installation category II, pollution degree 2

environment. It is designed to operate within a temperature range of 0 °C – 40 °C

(32 °F – 105 °F) at a maximum relative humidity (non-condensing) of 95% up to 40 °C

and at altitudes of up to 2000 meters.
This module can be stored or shipped at temperatures between -40 °C and +70 °C.

Protect the module from temperature extremes that may cause condensation within it.

Before Applying Power

Verify that all safety precautions are taken. The power cable inlet of the instrument serves

as a device to disconnect from the mains in case of hazard. The instrument must be

positioned so that the operator can easily access the power cable inlet. When the

instrument is rack mounted the rack must be provided with an easily accessible mains

switch.

Line Power Requirements

The Keysight M8121A operates when installed in a Keysight AXIe mainframe.

Do Not Operate in an

Explosive Atmosphere

Do not operate the instrument in the presence of flammable gases or fumes.

Do Not Remove the

Instrument Cover

Operating personnel must not remove instrument covers. Component replacement and

internal adjustments must be made only by qualified personnel.
Instruments that appear damaged or defective should be made inoperative and secured

against unintended operation until they can be repaired by qualified service personnel.

Ground the Instrument

To minimize shock hazard, the instrument chassis and cover must be connected to an

electrical protective earth ground. The instrument must be connected to the ac power

mains through a grounded power cable, with the ground wire firmly connected to an

electrical ground (safety ground) at the power outlet. Any interruption of the protective

(grounding) conductor or disconnection of the protective earth terminal will cause a

potential shock hazard that could result in personal injury.

Содержание M8121A

















































































































































Результаты поиска

Содержание M8121A

Отзывы:

Похожие инструкции для M8121A

Бренды по названию

Популярные бренды

Keysight M8121A, Руководство пользователя

Результаты поиска

Содержание M8121A

Отзывы:

Похожие инструкции для M8121A

Бренды по названию

Популярные бренды