Keysight M8100A Series, Руководство по началу работы, Страница: 21 / 46

Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide 21
Introduction 1
Table 4 Insertion/Extraction and Retaining
M8199A Front Panel Input/Output Ports
Table 5 M8199A Front Panel Input/Output Ports
Component Description
Retaining screws The screws on both ends of the module are used to retain the module tightly
inside the M9505A AXIe Chassis slot once you have fully placed it inside the
chassis. To remove the module, you first need to loosen these screws ensuring
that these screws disengage completely.
Module Insertion/Extraction
Handles The handles on both sides of the module to insert or eject the module from the
slot of the M9505A AXIe Chassis.
CAUTION
The inputs of the M8199A module are sensitive to static electricity.
Therefore, take necessary anti-static precautions, such as wearing a
grounded wrist strap, to minimize the possibility of electrostatic damage.
Component Description
REMOTE HEAD 1, 2 Remote Head Control. This output provides power and control signals for the
remote head amplifier
DATA OUT AND /DATA OUT Data outputs 1.85 mm
SYNC IN/OUT A,B The SYNC IN/OUT usage depends on whether the M8199A is connected to the
M8008A clock module or whether it is driven by an external clock source.
CASE 1 - M8199A connected to external clock source
The SYNC OUT A/B is used to synchronize two modules to a common system
clock. SYNC CLK OUT A is always connected to the SYNC IN of the same module
while SYNC CLK OUT B needs to be connected to the SYNC IN of the second
module.
The SYNC IN is used to synchronize two modules to a common system clock.
Connected to SYNC OUT A of this M8199A module.
CASE 2 - M8199A connected to M8008A clock source:
The SYNC OUT A/B is not used.
The SYNC IN is used to synchronize multiple modules to a common system
clock. It is connected to one of the SYNC OUT outputs of the M8008A module.