Keysight M8040A High-Performance BERT Getting Started Guide
23
Introduction
1
Table 7
Front Panel LEDs
M8046A Front Panel Inputs/Outputs Ports
Table 8
M8046A Front Panel Inputs/Outputs Ports
Connector Name
Active when...
Color
Fail
power-up fault condition
red
Access
power-up ready state
green
Clk In x
on when output active and CLK detected
green
Ctrl Out x
on when output active
green
Ctrl In x
logic state is detected
green
Data In
data received
green
CAUTION
The inputs of the M8046A module are sensitive to static electricity.
Therefore, take necessary anti-static precautions, such as wearing a
grounded wrist strap, to minimize the possibility of electrostatic damage.
Component
Description
Data In and /Data In
Differential data inputs (3.5 mm, female)
Clk In
Clock input to sample the incoming data. Full/half and quarter-rate clock.
Single ended. CTRL IN can be used as sequence trigger or pattern capture
event.
Sync In
This input is used to clock the analyzer from the pattern generator’s M8045A
system clock via the sync output A/B (requires cable M8051A-801). Not needed
if external clock is used.
This input is only available for M8046A modules with a serial number below
DExxxx01000.
Ctrl Out A
Outputs a pulse in case of an error. Generates a pulse or static high/low if used
from sequencer.
Содержание M8000 Series
