Keysight M5200A, Руководство для стартапов

Страница: 36 / 80

36 M5200A PXIe Digitizer Modules Startup Guide
2 Setting up the M5200A module
Figure 7 Depiction of installing a PXIe embedded controller module
• While holding the module by the injector/ejector handle and making
sure the injector/ejector handle is pushed down in the unlatched
(downward) position, slide the controller module into chassis, using
the slot guides (top and bottom).
• Sliding the module into position, when you begin to feel resistance,
pull up on the injector/ejector handle to fully inject the module into
the chassis backplane connectors.
• Tighten the module retaining screws (top and bottom) and torque
them to 5 Lb-In (0.57 N-m).
3 Install a blank Y1213A filler panel in the empty slot to the left of the
controller.
4 Connect peripherals (mouse, keyboard, and monitor).