14 | Keysight | N9342C/N9343C/N9344C HSA Handheld Spectrum Analyzer - Demonstration Guide
Instructions for HSA
Keystrokes for HSA
Edit the task plan description, running mode, and save the task plan
–
Input “This task is used to do W-CDMA BS RF verification” as the task
plan description
–
Select “Auto” as the running mode
–
Click “Save as” and save this file as:“W_CDMA.tpf”. Close the “Task Plan
Editor” dialog box
Running mode
There are three choices (see Figure 11):
1. Auto
–
Tasks are executed non-stop until tasks are completed
2. Manual
–
After one measurement task is finished, there is a measurement
result report and you can choose to
–
{Redo}
Redo the current task
–
{Next}
Execute the next task
–
{Skip}
Skip the next task
3. Manual if failed
–
The measurement tasks are executed non-stop and there is a
failed result, e.g. passing the defined limit, it will enter “Manual”
mode (Figure 12)
Note: A “Load” button is provided to load an existing *.TPF for future modification
Figure 12. Test measurement result (manual mode)
Demonstration 5
Task planner
(continued)
Figure 11. Task plan running mode