Keysight DCA-X Series, Быстрый старт

Страница: 17 / 48

2
Installing the N1000A
Step 1. Inspect the Shipment 18
Step 2. Work at a Static-Safe Workstation 20
Step 3. Position the N1000A 23
Step 4. Install the Modules 25
Step 5. Connect the Keyboard and Mouse (optional) 26
Step 6. Connect the Power 27
Step 7. Turn On the Instrument 28
Step 8. Configure a LAN Connection (Optional) 30
Step 9. Install a Feature License (Optional) 31
Step 10. Connect a Printer (Optional) 31
Step 11. Connect an External Display (Optional) 32
Step 12. Calibrate the Modules 33
Step 13. Learn How to Use and Program the N1000A 35
Complete the steps in this chapter to install the N1000A. For important safety
information, refer to
N1000A Safety Information on page 15 .
Electrical channel input circuits and the trigger input circuit can be damaged by
electrostatic discharge (ESD). Therefore, avoid applying static discharges to the
front-panel input connectors. Prior to connecting any coaxial cable to the
connectors, momentarily short the center and outer conductors of the cable
together. Avoid touching the front-panel input connectors without first
touching the frame of the instrument. Be sure that the instrument is properly
earth-grounded to prevent buildup of static charge. Wear a wrist-strap or heel-
strap.
Optical channel fiber-optic connectors on plug-in modules are easily damaged
when connected to dirty or damaged cables and accessories. When you use
improper cleaning and handling techniques, you risk expensive instrument
repairs, damaged cables, and compromised measurements. Before you
connect any fiber-optic cable to the N1000A, refer to
Connector Care on
page 11 .
17
N1000A Quick Start Guide