Keysight DCA-X Series, Быстрый старт

Страница: 15 / 48

1 Introduction
N1000A Safety Information
This product has been designed and tested in accordance with accepted
industry standards, and has been supplied in a safe condition. The
documentation contains information and warnings that must be followed by the
user to ensure safe operation and to maintain the product in a safe condition.
Installation Category: Installation Categories (overvoltage categories) are
determined by the transient overvoltage levels that may be expected. CAT I:
Mains isolated. CAT II: Line voltage in appliance and to wall outlet. CAT III: Line
voltage behind wall outlet to next level of distribution.
Only Keysight approved accessories shall be used.
This is a Safety Protection Class I Product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be inserted
in a socket outlet provided with a protective earth contact. Any interruption of
the protective conductor inside or outside of the product is likely to make the
product dangerous. Intentional interruption is prohibited.
If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal condition
(in which all means for protection are intact) only.
No operator serviceable parts inside. Refer servicing to qualified personnel. To
prevent electrical shock do not remove covers.
Safety of any system incorporating the equipment is the responsibility of the
assembler of the system.
This product is designed for use in INSTALLATION CATEGORY II and
POLLUTION DEGREE 2 environment.
N1000A Quick Start Guide 15