Getting Started
1
Keysight 8990B Installation Guide
53
Installing the 8990B into the rack
1
Slide the support tray onto the rails, but do not slide completely into the rack.
Instead, leave it slightly extended so you can place the 8990B on top of it as
shown in
Figure 1-20
Support tray
2
Place the 8990B on the support tray. There are raised tabs in the support tray. The
front side of the 8990B rear feet should rest against these tabs as shown below.
Figure 1-21
Raised tabs in the support tray
NOTE
Do not leave the support tray extended too much or else it may not support the
8990B when you place it on top.
The front of the 8990B
rear feet should rest
against these tabs
Содержание 8990B
Страница 1: ...Keysight 8990B Peak Power Analyzer Installation Guide ...
Страница 12: ...12 Keysight 8990B Installation Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 16: ...16 Keysight Product Model User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 18: ...18 Keysight Product Model User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...