background image

2

Keysight 86205A Operating and Service Manual

Notices

Copyright Notice

© Keysight Technologies 1992 - 2019
No part of this manual may be reproduced in 

any form or by any means (including electronic 

storage and retrieval or translation into a for-

eign language) without prior agreement and 

written consent from Keysight Technologies as 

governed by United States and international 

copyright laws.

Manual Part Number

86205-90001

Edition

Edition 2, March 12, 2019

Printed in:

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Technology Licenses 

The hardware and/or software described in 

this document are furnished under a license 

and may be used or copied only in accordance 

with the terms of such license.

Declaration of Conformity

Declarations of Conformity for this product 

and for other Keysight products may be down-

loaded from the Web. Go to 

http://www.key-

sight.com/go/conformity

. You can then search 

by product number to find the latest Declara-

tion of Conformity.

U.S. Government Rights

The Software is “commercial computer soft-

ware,” as defined by Federal Acquisition Regu-

lation (“FAR”) 2.101. Pursuant to FAR 12.212 

and 27.405-3 and Department of Defense FAR 

Supplement (“DFARS”) 227.7202, the U.S. 

government acquires commercial computer 

software under the same terms by which the 

software is customarily provided to the public. 

Accordingly, Keysight provides the Software to 

U.S. government customers under its standard 

commercial license, which is embodied in its 

End User License Agreement (EULA), a copy of 

which can be found at 

http://www.key-

sight.com/find/sweula

. The license set forth in 

the EULA represents the exclusive authority by 

which the U.S. government may use, modify, 

distribute, or disclose the Software. The EULA 

and the license set forth therein, does not 

require or permit, among other things, that 

Keysight: (1) Furnish technical information 

related to commercial computer software or 

commercial computer software documenta-

tion that is not customarily provided to the 

public; or (2) Relinquish to, or otherwise pro-

vide, the government rights in excess of these 

rights customarily provided to the public to 

use, modify, reproduce, release, perform, dis-

play, or disclose commercial computer soft-

ware or commercial computer software 

documentation. No additional government 

requirements beyond those set forth in the 

EULA shall apply, except to the extent that 

those terms, rights, or licenses are explicitly 

required from all providers of commercial com-

puter software pursuant to the FAR and the 

DFARS and are set forth specifically in writing 

elsewhere in the EULA. Keysight shall be 

under no obligation to update, revise or other-

wise modify the Software. With respect to any 

technical data as defined by FAR 2.101, pursu-

ant to FAR 12.211 and 27.404.2 and DFARS 

227.7102, the U.S. government acquires no 

greater than Limited Rights as defined in FAR 

27.401 or DFAR 227.7103-5 (c), as applicable 

in any technical data.

Warranty

THE MATERIAL CONTAINED IN THIS DOCU-

MENT IS PROVIDED “AS IS,” AND IS SUBJECT 

TO BEING CHANGED, WITHOUT NOTICE, IN 

FUTURE EDITIONS. FURTHER, TO THE MAXI-

MUM EXTENT PERMITTED BY APPLICABLE 

LAW, KEYSIGHT DISCLAIMS ALL WARRAN-

TIES, EITHER EXPRESS OR IMPLIED, WITH 

REGARD TO THIS MANUAL AND ANY INFOR-

MATION CONTAINED HEREIN, INCLUDING 

BUT NOT LIMITED TO THE IMPLIED WARRAN-

TIES OF MERCHANTABILITY AND FITNESS 

FOR A PARTICULAR PURPOSE. KEYSIGHT 

SHALL NOT BE LIABLE FOR ERRORS OR FOR 

INCIDENTAL OR CONSEQUENTIAL DAMAGES 

IN CONNECTION WITH THE FURNISHING, 

USE, OR PERFORMANCE OF THIS DOCU-

MENT OR OF ANY INFORMATION CONTAINED 

HEREIN. SHOULD KEYSIGHT AND THE USER 

HAVE A SEPARATE WRITTEN AGREEMENT 

WITH WARRANTY TERMS COVERING THE 

MATERIAL IN THIS DOCUMENT THAT CON-

FLICT WITH THESE TERMS, THE WARRANTY 

TERMS IN THE SEPARATE AGREEMENT 

SHALL CONTROL.

Safety Information

CAUTION

A CAUTION notice denotes a hazard. It calls 

attention to an operating procedure, practice, 

or the like that, if not correctly performed or 

adhered to, could result in damage to the 

product or loss of important data. Do not pro-

ceed beyond a CAUTION notice until the indi-

cated conditions are fully understood and met.

WARNING

A WARNING notice denotes a hazard. It calls 

attention to an operating procedure, practice, 

or the like that, if not correctly performed or 

adhered to, could result in personal injury or 

death. Do not proceed beyond a WARNING 

notice until the indicated conditions are fully 

understood and met.

Содержание 86205A














































Отзывы: