3
Programming
152
Keysight 53147A/148A/149A Operating and Programming Guide
Connecting the Instrument to a Computer
To program the instrument to operate remotely, you need to interface the
instrument with a computer. The Keysight 53147A, 53148A, and 53149A provide
two interfaces for remote, computer-controlled operation
—
GPIB and RS-232. The
following sections describe how to connect and configure both interfaces for
remote instrument operation.
Connecting With the GPIB
To connect the instrument to a computer using the GPIB, install an GPIB cable
(such as the Keysight 10833A cable) between the two units, as shown in
.
Figure 3-3
GPIB Interconnection
Configuring the GPIB
The instrument’s GPIB operates in Addressed (talk/listen) mode, which provides
bi-directional communication. The instrument can receive commands and setups
from a computer, and it can send data and measurement results. There is one
configurable setting related to GPIB communication—the GPIB Address.
Keysight
53147A/148A/149A
(Rear Panel)
Keysight 10833A/B/C/D
GPIB Cable
Computer (Rear Panel)
OPTIONS
001 Oven Time Base
002 Battery
Main Power
!
!
In or Out
Reference 10 MHz
Auxiliary
AC POWER
90-130 VAC 50/60/400 Hz
190-230 VAC 50/60 Hz
FUSE
1.0 A
250V
WARNING:
To avoid electrical shock:
Do not remove covers.
No user serviceable parts inside.
Refer all servicing to qualified personnel.
RS-
232
GPIB
Counter/ Power Meter/ DVM
This unit must be earth grounded.
Made in U.S.A.
of domestic and foreign content
Содержание 53147A
Страница 1: ...Keysight 53147A 148A 149A Microwave Frequency Counter Power Meter DVM Operating and Programming Guide ...
Страница 20: ...20 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 310: ...312 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...