Keysight 34959A Скачать руководство пользователя страница 2

2

Keysight 34959A User’s Guide

Notices

Copyright Notice

© Keysight Technologies 2008-2019
No part of this manual may be 

reproduced in any form or by any 

means (including electronic storage 

and retrieval or translation into a 

foreign language) without prior 

agreement and written consent from 

Keysight Technologies as governed by 

United States and international 

copyright laws.

Trademarks

Microsoft® and Windows® are U.S. 

registered trademarks of Microsoft 

Corporation. 

Manual Part Number

34980-90059

Edition

Edition 3, July 1, 2019

Printed in:

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Technology Licenses 

The hardware and/or software 

described in this document are 

furnished under a license and may be 

used or copied only in accordance with 

the terms of such license.

Declaration of Conformity

Declarations of Conformity for this 

product and for other Keysight 

products may be downloaded from the 

Web. Go to 

http://www.keysight.com/

go/conformity

. You can then search by 

product number to find the latest 

Declaration of Conformity.

U.S. Government Rights

The Software is “commercial computer 

software,” as defined by Federal 

Acquisition Regulation (“FAR”) 2.101. 

Pursuant to FAR 12.212 and 27.405-3 

and Department of Defense FAR 

Supplement (“DFARS”) 227.7202, the 

U.S. government acquires commercial 

computer software under the same 

terms by which the software is 

customarily provided to the public. 

Accordingly, Keysight provides the 

Software to U.S. government 

customers under its standard 

commercial license, which is embodied 

in its End User License Agreement 

(EULA), a copy of which can be found 

at 

http://www.keysight.com/find/

sweula

. The license set forth in the 

EULA represents the exclusive authority 

by which the U.S. government may use, 

modify, distribute, or disclose the 

Software. The EULA and the license set 

forth therein, does not require or 

permit, among other things, that 

Keysight: (1) Furnish technical 

information related to commercial 

computer software or commercial 

computer software documentation that 

is not customarily provided to the 

public; or (2) Relinquish to, or 

otherwise provide, the government 

rights in excess of these rights 

customarily provided to the public to 

use, modify, reproduce, release, 

perform, display, or disclose 

commercial computer software or 

commercial computer software 

documentation. No additional 

government requirements beyond 

those set forth in the EULA shall apply, 

except to the extent that those terms, 

rights, or licenses are explicitly required 

from all providers of commercial 

computer software pursuant to the FAR 

and the DFARS and are set forth 

specifically in writing elsewhere in the 

EULA. Keysight shall be under no 

obligation to update, revise or 

otherwise modify the Software. With 

respect to any technical data as 

defined by FAR 2.101, pursuant to FAR 

12.211 and 27.404.2 and DFARS 

227.7102, the U.S. government 

acquires no greater than Limited Rights 

as defined in FAR 27.401 or DFAR 

227.7103-5 (c), as applicable in any 

technical data.

Warranty

THE MATERIAL CONTAINED IN THIS 

DOCUMENT IS PROVIDED “AS IS,” 

AND IS SUBJECT TO BEING 

CHANGED, WITHOUT NOTICE, IN 

FUTURE EDITIONS. FURTHER, TO THE 

MAXIMUM EXTENT PERMITTED BY 

APPLICABLE LAW, KEYSIGHT 

DISCLAIMS ALL WARRANTIES, EITHER 

EXPRESS OR IMPLIED, WITH REGARD 

TO THIS MANUAL AND ANY 

INFORMATION CONTAINED HEREIN, 

INCLUDING BUT NOT LIMITED TO THE 

IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE. KEYSIGHT 

SHALL NOT BE LIABLE FOR ERRORS 

OR FOR INCIDENTAL OR 

CONSEQUENTIAL DAMAGES IN 

CONNECTION WITH THE 

FURNISHING, USE, OR 

PERFORMANCE OF THIS DOCUMENT 

OR OF ANY INFORMATION 

CONTAINED HEREIN. SHOULD 

KEYSIGHT AND THE USER HAVE A 

SEPARATE WRITTEN AGREEMENT 

WITH WARRANTY TERMS COVERING 

THE MATERIAL IN THIS DOCUMENT 

THAT CONFLICT WITH THESE TERMS, 

THE WARRANTY TERMS IN THE 

SEPARATE AGREEMENT SHALL 

CONTROL.

Safety Information

CAUTION

A CAUTION notice denotes a hazard. It 

calls attention to an operating 

procedure, practice, or the like that, if 

not correctly performed or adhered to, 

could result in damage to the product 

or loss of important data. Do not 

proceed beyond a CAUTION notice 

until the indicated conditions are fully 

understood and met.

WARNING

A WARNING notice denotes a hazard. It 

calls attention to an operating 

procedure, practice, or the like that, if 

not correctly performed or adhered to, 

could result in personal injury or death. 

Do not proceed beyond a WARNING 

notice until the indicated conditions are 

fully understood and met.

Содержание 34959A








































Отзывы: