Keysight 34959A, Руководство пользователя

Страница: 11 / 39

Keysight 34959A User’s Guide 11
34959A Breadboard Module Disassembly
The module as shipped as shown below. The port covers must be removed if
DB50/78 connectors will be installed for external connections; otherwise they can
remain in place. The top cover provides mechanical integrity and shielding for the
module, and should be attached except when the module is being configured. To
unfasten the top cover, remove the screw with a Torx T10 driver, slide the cover
back 5mm as shown, and lift the cover up. Reverse this procedure to replace the
cover.
34959A Breadboard Module as Shipped
The Keysight-supplied PC board must be removed if you are making connections
to the Analog Buses, in order to solder the necessary relays (not provided) and
lead wires. To remove this PC board, remove the Torx T10 screw shown, slide the
cover back 5mm to clear the two retaining tabs, and lift the board up. Reverse this
procedure to reinstall the board.
Slide
cover
back
5mm
and li
ft up t
o rem
ove
Torx T10
Screw
DB50/DB78
port covers