Keysight 33210A, Руководство пользователя

Страница: 275 / 351

273
Chapter 5 Error Messages
Command Errors
4
5
Command Errors
-101
Invalid character
An invalid character was found in the command string. You may have
used an invalid character such as #, $, or % in the command header or
within a parameter. Example:
TRIG:SOUR BUS#
-102
Syntax error
Invalid syntax was found in the command string. You may have
inserted a blank space before or after a colon in the command header,
or before a comma. Example:
APPL:SIN ,1
-103 Invalid separator
An invalid separator was found in the command string. You may have
used a comma instead of a colon, semicolon, or blank space – or you may
have used a blank space instead of a comma. Examples:
TRIG:SOUR,BUS
or
APPL:SIN 1 1000
-105
GET not allowed
A Group Execute Trigger (
GET
) is not allowed within a command string.
-108
Parameter not allowed
More parameters were received than were expected for the command.
You may have entered an extra parameter or added a parameter to a
command that does not require a parameter. Example:
APPL? 10
-109
Missing parameter
Fewer parameters were received than were expected for this command.
You have omitted one or more parameters that are required for this
command. Example:
OUTP:LOAD
33210A users guide.book Page 273 Wednesday, July 16, 2008 11:16 AM