1
Keysight ZA0060A Quick Start Guide
39
Test Steps and Description
Set
Bluetooth
®
5 DL Power
This step must be a child step of
. This step initializes the output power
for the
Bluetooth
®
5 Signaling PER test according to the System Offset set. It will only be executed when
a device is selected in this step.
Step Settings:
– System Offset: Set path loss to DUT.
– DL Power (dBm): Select the value from the drop-down list. The software will calculate the output
power based on this value and System Offset. The output power range varies according to the
module:
– Standard module is from -100 to -40 dBm.
– Low power module is from -95 to -20 dBm.
This test step will report a 'Pass' only when the Active Scan and Connect Request for
Bluetooth
®
5 test
steps report a 'Pass' (subject to the PER mode supported).
