Keysight Technologies V281C, Руководство по эксплуатации и обслуживанию

Страница: 12 / 37

1 General Information
12 Keysight V281C/D and W281C/D Operating and Service Manual
1.0 mm Connector Overview
These adapters are used for the measurement of components with 50 W ,1.0 mm connectors with a
frequency range from DC to 110 GHz.
The 1.0 mm connector utilizes an air dielectric interface for the highest accuracy and repeatability.
The coupling diameter and thread size were chosen to maximize strength, increase durability, and
provide highly repeatable connections. The connectors are designed so that the outer conductors
engage before the center conductors.
To obtain the best performance possible, the manufacturing tolerances of the connectors are
tighter than the standard 1.0 mm specifications per the IEEE 287 connector standard.
About This Manual
This manual describes the V281C/D and W281C/D coaxial to waveguide adapters and provides
replacement part numbers, specifications, and procedures for using and maintaining the adapters.
Throughout this manual, the V281C/D and W281C/D coaxial to waveguide adapters will be
referred to as the V and W-band Adapters.
Serial Numbers
A serial number label is attached to each adapter. The serial number is made up of five numbers
and is unique to each adapter.