Keysight Technologies U4301 Скачать руководство пользователя страница 121

Страница: 121 / 204

Keysight U4301 PCIe Gen3 Analyzer User’s Guide

121

Computing and Viewing Decoded Transactions

8 Click the

MSI-X

tab to view/add/modify the MSI-X table entries that were discovered for the

NVMe device.

9 Click

to confirm and apply these settings.

To view/edit details of an AHCI device

An AHCI device’s details such as the ports that it supports are autodiscovered while computing

decoded transactions. If needed, you can add, remove, or edit these details of an AHCI device in the

Device Setup dialog box.

1 In the

AHCI Port

tab, click the

Add AHCI Port Entry

button if you want to add an AHCI port that the

device supports. This tab displays the autodiscovered ports of the AHCI device.

2 In the

Port

field, view/modify the port number.

3 In the

Command List Address

field, view/modify the base physical address of the Command List of

the selected AHCI port. A command list refers to the list of commands that the HBA fetches from

the command list base address to execute. The base address of the command list is as per the

PxFB

and

PxFBU

port registers.

4 In the

FIS Address

field, view/modify the base address of the FISes (Frame Information Structure)

received for the selected AHCI port. An FIS refers to the frame of information exchanged between

the host and device. The base address of the FIS is as per the

PxFB

and

PxFBU

port registers.

5 Click the

MSI / MSI-X

tab to view/modify the MSI / MSI-X capabilities that were discovered for the

AHCI device.

6 Click the

MSI-X

tab to view/add/modify the MSI-X table entries that were discovered for the AHCI

device.

7 Click

to confirm and apply these settings.

Saving the Device Setup Details

You can save the device, its queues, and namespace details (specified using the Transaction Decode

Setup dialog box) in a Transaction decode (.tdprop) file. Once saved, you can open this file later in

the Transaction Decode Setup dialog box to quickly access and set up the device details for a

transaction decode computation.

Содержание U4301













































































































































































































Результаты поиска

Содержание U4301

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies U4301, Руководство пользователя

Результаты поиска

Содержание U4301

Отзывы:

Бренды по названию

Популярные бренды