22
Keysight U2941A Operating Guide
Hardware Installation
Attaching the socket module
After selecting the appropriate socket module for the DUT, install the socket
module to the U2941A. The following figure shows the attachment of a socket
module to the U2941A.
Use the following procedure to attach the socket module.
1
Open the lid of the U2941A.
2
Check that the black plastic fasteners of the socket module are unlocked
(pulled up).
3
Insert the socket module onto the U2941A.
4
Press the black plastic fasteners down to lock the socket module into place.
Black plastic fasteners
Socket module
NOTE
Ensure that no voltage or current is applied to the U2941A when attaching the
socket module.
Содержание U2941A
