Keysight Technologies S9101A, Руководство для стартапов, Страница: 31 / 98

3 Review Hardware Components
S9101A 5G Multi-Band Vector Transceiver, Startup Guide 27
3. 2. 6 Connectors, Option
TR1, TR2
, S9101RH mmWave Transceiver
3. 2. 6. 1 Ext Trig, LEDs, & Interfaces on S9101RH mmWave Transceiver
Ext Trig
Connector SMA (m), 50 Ω, nominal , DC to 40 GHz
Input Level Range 5 V TTL (Trigger signal below 0.8 volts is a "zero"
(low) and anything above +2.4 volts is a "one" (high).
LEDs
Trig (LED) A trigger indicator (used by Keysight in testing; not
needed for customer use). In normal usage
(as described for Ext Trig) the LED does not light.
RF1 (LED) Indicates the current status of the RF Tx/Rx 1 port,
according to the color scheme:
Blue = Tx (port is in transmit mode)
Green = Rx (port is in receive mode)
White = Idle (port is not in use)
During switching between modes, intermediate
shades of color occur temporarily.
RF2 (LED) Indicates the current status of the RF Tx/Rx 2 port,
according to the color scheme described for RF1
above.
Status (LED) Lights to indicate that the S9101RH is currently
under instrument control,
according to the color scheme:
Orange = connected,
but no active communication currently
Green = connected,
with active communication currently
USB
Connector Micro-USB B
Reserved for Keysight internal use only.
Aux
Connector Micro-D 15-pin
A power input (used by Keysight in testing;
not needed for customer use).