Keysight Technologies N2879A, Руководство пользователя

Страница: 4 / 16

4
Safety Information
Safety Information
W a r n i n g To avoid personal injury and to prevent fire or damage to this product or products
connected to it, review and comply with the following safety precautions (these
apply to the accessories in the N2879A kit and the N2870A Series probes). Be
aware that if you use this probe assembly in a manner not specified, the protection
this product provides may be impaired.
Handle Probe Tips / Accessories Carefully
Some of the probe tips / accessories are very sharp (the spring tips and ground
spring, for example). You should handle these with care to avoid personal injury.
Use Only Grounded Instruments
Do not connect the probe’s ground lead to a potential other than earth ground.
Always make sure the probe and the oscilloscope are grounded properly.
Connect and Disconnect Properly
Connect the probe to the oscilloscope and connect the ground lead to earth
ground before connecting the probe to the circuit under test. Disconnect the
probe input and the probe ground lead from the circuit under test before
disconnecting the probe from the oscilloscope.
Observe Probe Ratings
Do not apply any electrical potential to the probe input which exceeds the
maximum rating of the probe. Make sure to comply with the voltage versus
frequency derating curve in the N2870A Series User’s Guide.
Keep Away From Live Circuits
Avoid open circuitry. Do not touch connections or components when power is
present.
Indoor Use Only
Do not operate in wet/damp environments. Keep product surfaces dry and clean.
Do Not Operate With Suspected Failures
Refer to qualified service personnel.
Do Not Operate in an Explosive Environment
!