Keysight Technologies N108 A Series Скачать руководство пользователя страница 10

Страница: 10 / 78

N108xA-Series Getting Started

Introduction

Recommended Equipment

Table 2

Recommended Equipment

Equipment

86100D Module Configuration

Single Plug-In Module Setup

Multiple Module Setup

86100D Oscilloscope

86100D DCA-X

with options:

86100D-ETR Extended Trigger

86100D-200 Enhanced Jitter Analysis

86100D-201 Advanced Waveform Analysis

86100D Plug-In Module

86108A or 86108B with options LBW/HBW and

216/232.

N1045A, 86117A, or 86118A-H01 dual receiver.

86107A precision timebase (any option).

N4877A-216/232 (for clock recovery.

†

Software

N1081A, N1082A, N1083A, and N1084A IEEE 802.3 Compliance Application.

86100DU-401 Advanced Eye Software (for measuring jitter at PRBS31).

A version of the 86100DU-401 is automatically installed with the N1081A-series application.

Keysight I/O Libraries, 16.3 or higher

Option N1010A-SIM InfiniiSim DCA Waveform Transformation Toolset.

Provides InfiniiSim Transform operators to FlexDCA.

Performance Network Analyzer

(PNA) or Economy Network

Analyzer (ENA)

Any 4-port model with frequency range of at least 19 GHz

(ENA also covers the 1 MHz termination mismatch test)

The network analyzer is used to perform return-loss measurements.

Switching Test Set

(optional)

Keysight U3020A S26 DC to 26.5 GHz, or

BitifEye BIT 2100

Matched Cable Set

86108B- CA2 or 86108B-CA3

(quantity 1)

Phase Trimmers

86108B-PT2 or 86108B-PT3

(quantity 2)

DC Blocks

86108B-DC3, N9398C, N9399C, or 11742A

(quantity 2)

Pick-Off

N/A

N4915A-015

(quantity 2)

Test Adapters

(optional)

Visit http://shop.wilder-tech.com/category_s/42.htm

* FlexDCA version A.02.51 or greater

† If you have access to the clock for the device, you can connect the clock to the 86100D’s Trigger input instead of using the N4877A.

Содержание N108 A Series















































































Результаты поиска

Содержание N108 A Series

Отзывы:

Похожие инструкции для N108 A Series

Бренды по названию

Популярные бренды

Keysight Technologies N108 A Series, Начало работы

Результаты поиска

Содержание N108 A Series

Отзывы:

Похожие инструкции для N108 A Series

Бренды по названию

Популярные бренды