Keysight Technologies M9336A, Руководство для стартапов

Страница: 32 / 51

Step 3B - Install the M9336A PXIe Module
Install Slot Blockers and Filler Panels
To assure proper operating temperatures, install slot blockers (Keysight model
Y1212A , 5 per kit) and EMC filler panels (Keysight model Y1213A , 5 per kit) in empty
module slots.
Install the
PXIe
Module
Procedure for Installing Module
Plan your module position. Before installing the module, remove plastic thread
protectors on the top and bottom of mounting screws. Install the left-most module
first and continue installing modules from left to right according to the image below:
When installing the M9336A AWG:
1. Hold the module by the injector/ejector handle and make sure that the
injector/ejector handle is pushed down in the unlatched (downward) position.
Slide the module into chassis, using the slot guides (top and bottom).
2. Slide the module into position. When you begin to feel resistance, pull up the
injector/ejector handle to fully inject the module into the chassis backplane
connectors.
3. Tighten the module retaining screws (top and bottom) and torque them to 5 Lb-In
(0.57 N-m).
Generic module installation is shown above. It may not reflect your
module's actual size and chassis placement.
AWG Startup Guide 32