Keysight Technologies M9336A, Руководство для стартапов

Страница: 16 / 51

Step 1 - Unpack, Inspect and Verify the shipment
Step 1 - Unpack, Inspect and Verify the shipment
The module arrives packed in one small box. Before unpacking your module(s),
inspect the packaging container for evidence of mishandling during transit. Inspect
the carton carefully for damages or signs of rough handling.
Remove the AWG from the packaging container and ensure that all accessories are
included. Inspect the AWG and accessories for damage. If the contents appear
damaged, notify your local Keysight Technologies Inc. representative.
The module is shipped in materials which prevent damage from
electrostatic discharge. The module should only be removed from the
packaging in a static-safe area ensuring that correct static-safe
precautions are taken. Store the module in an anti-static envelope
when not in use.
ESD
Electrostatic discharge (ESD) can damage or destroy electronic components. Use a
static-safe workstation to perform all work on electronic assemblies. The figure (left)
shows a static-safe workstation using two types of ESD protection:
– Conductive table-mat and wrist-strap combination
– Conductive floor-mat and heel-strap combination
Both types, when used together, provide a significant level of ESD protection. Of the
two, only the table-mat and wrist-strap combination provides adequate ESD
protection when used alone. To ensure user safety, the static-safe accessories must
provide at least 1 M
Ω of isolation from ground.
DO NOT use these techniques for a static-safe workstation when
working on circuitry with a voltage potential greater than 500 volts.
Verify AWG Shipment
P9336A Shipment Contents
The table below lists the items included in your P9336A AWG Shipment:
AWG Startup Guide 16