Keysight Technologies M9155C PXI, Руководство по запуску и обслуживанию

Страница: 22 / 39

1 Getting Started
22 Keysight M9155/6/7C and M9161D Startup and Service Guide
Step 4: Install the M9155/6/7C and M9161D
1 Ensure that the PXI chassis power switch is in the Off (Standby) position; then
unplug the chassis.
2 If the chassis has multiple fan speed settings, ensure that the fans are set to
automatic. Do not set the fan speed to low or turn it off.
3 Position the chassis so that there is ample space between the chassis fan
intake and exhaust vents. Blockage by walls or obstructions affects the air flow
needed for cooling. (Refer to the chassis documentation for more information
about cooling).
NOTE
The M9155/6/7C and M9161D can be used in a chassis with a cPCI, PXI-1, or
PXIh chassis peripheral slot.
The M9155/6/7C and M9161D can be installed in any standard PXI slot marked with
a peripheral slot compatibility image (a circle containing the slot number).
The M9155/6/7C and M9161D can also be installed in any hybrid PXI slot marked
with a peripheral slot compatibility image (the letter "H" and a solid circle containing
the slot number).
CAUTION
PXI hardware does not support "hot-swap" capabilities (changing modules
while power is applied to the chassis).
Before installing a module into the chassis, the chassis must be powered off
and unplugged to prevent damage to the module.