Keysight Technologies M9019A PXIe, Руководство для стартапов

Страница: 30 / 36

30
Keysight PXIe Chassis Family Startup Guide
If no chassis has been detected by Connection Expert, the
SFP startup
dialog
appears as shown in the following image. The absence of a chassis listed under
Modules indicates that no chassis has been detected; therefore, the SFP can only
be run in simulation mode.
To run in simulation mode, select the
Simulation Mode
check box in the above
image. This displays M9019A in the Modules list. Then click
M9019A
in the Modules
list to select it, which displays M9019A in the
Selected Instrument
field. Click
Connect
to start the SFP in simulation mode.
If a chassis has been detected, M9019A and the address of the chassis is listed
under
Modules
, as shown in the following image.