Keysight Technologies M9019A PXIe, Руководство для стартапов

Страница: 18 / 36

1
8
Keysight PXIe Chassis Family Startup Guide
1.
2
.
3
.
4
.
1.
Turn the chassis off and unplug the chassis from AC power.
Before inserting the module, inspect the chassis slot to ensure there are no
bent pins on the slot connectors.
Insert the module in the chassis slot by placing the module card edges into
the top and bottom module guides.
To avoid damaging the module, do not touch exposed connectors
or components on the printed circuit board as you install the
module.
Modules are usually shipped with thread protectors on the
mounting screw threads. These protectors must be removed
before installing modules in the chassis.
Take care to ensure that the module is aligned perpendicularly to
the chassis as you begin sliding it in. Otherwise, it is possible for
components on the module (or on adjacent modules) to be
damaged by contact between modules.
With the injector/ejector handle in the down position, carefully slide the
module to the rear of the chassis. When you begin to feel resistance from the
backplane connectors, push up on the injector/ejector handle to complete
insertion of the module and latch it into place.
Secure the module front panel to the chassis using the captive front panel
mounting screws. All modules have two captive mounting screws. Tighten
the screws for both mechanical security and to ensure proper grounding of
the front panel.
Ensure that all empty chassis slots are covered by filler panels or air inlet
modules.