Keysight Technologies FieldFox A Series Скачать руководство пользователя страница 683

Страница: 683 / 756

Keysight N9927-90001 User’s Guide 683

File Management
Saving and Recalling Files

Edit Keywords

The preselected keywords (FILE, SITE, and so forth) can be edited to meet your

specific needs. Your keywords will remain in the FieldFox until you change

them. Keywords are limited to 30 characters.

How to edit keywords

— Press

Save/Recall 9

— Then

More

— Then

Edit Keywords

— Then

Next Page

and

Previous Page

to view all keywords.

— Use the

arrows to select a keyword to edit.

— When a keyword is selected, then press

Edit

— Then choose from the following:

— Press

Select

to add the cursor character to the end of the selected

keyword.

— Press

Backspace

to erase the last character from the end of the

selected keyword.

— Press

Shift

to change from upper-case to lower-case and vice versa.

— Press

Alt Keywords

to toggle through different keyword choices.

How to move the cursor:

— Use the rotary knob to move the cursor along the same row. The cursor will

change rows when it comes to a row end.

— Use the

arrows to move the cursor up and down between rows.

When the selected keyword is complete:

— Press

Done

to save all keywords and close the Edit Keywords labeler. These

keywords will exist on the FieldFox until changed.

— Press

Cancel

to close the labeler without saving changes.

Prefixes and Suffixes for Filenames

The prefix and suffix (Auto Append) can be used together to organize files.

Once set and enabled, they are automatically entered as the beginning (Prefix)

and end (Suffix - using Auto Append) of a filename when performing a Save

Содержание FieldFox A Series





















































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FieldFox A Series

Отзывы:

Похожие инструкции для FieldFox A Series

Бренды по названию

Популярные бренды

Keysight Technologies FieldFox A Series, Руководство пользователя

Результаты поиска

Содержание FieldFox A Series

Отзывы:

Похожие инструкции для FieldFox A Series

Бренды по названию

Популярные бренды