Keysight Technologies FieldFox A Series Скачать руководство пользователя страница 679

Страница: 679 / 756

Keysight N9927-90001 User’s Guide 679

File Management
Saving and Recalling Files

—

Data (S1P) / (S2P)

Saves

CAT

and

Mode trace data to an *.S1P or

*.S2P file, depending on the active measurement. This file format is

used by CAE programs such as Keysight's Microwave Design System

(MDS) and Advanced Design System (ADS). It can also be imported

into spreadsheet software such as Microsoft Excel.

About SNP Files

The SNP file includes header information, and the following data:

— S1P - saves 1-port (receiver) data for the active data trace. *.s1p Files

contain 1 stimulus value and 1 S-parameter (total of 3 scalar values)

Stim

Real(Sxx) Imag(Sxx)

— S2P (NA Mode ONLY) - saves 2-port data for the active trace. *.s2p

Files

contain 1 stimulus value and 4 S-parameters (total of 9 scalar values)

Stim

Real(S11) Imag(S11) Real(S21) Imag(S21) Real(S12) Imag(S12)

Real(S22) Imag(S22)

— Only data traces are saved – not memory traces.

Corrections

— When parameters are corrected, data is returned even when not displayed.

Data is returned with the correction type that is applied for each

S-parameter. The correction type for each S-parameter is annotated in the

header.

— When parameters are NOT corrected or displayed:

— With Smith chart and Polar formats, Real/Imag zero-filled data

appears as (1.0, 0.0).

— With all other formats, LogMag/Phase zero-filled data appears as

(0.0, 0.0).

> Display formats

In CAT Mode, S1P files are always Magnitude (dB) / Phase (angle) format.
In NA Mode:

— Smith chart and Polar display formats are ALWAYS saved in Real/Imag data

pairs.

— All other display formats are saved in LogMag/Phase (dbAngle).

> What Data Processing functions are included in saved SNP Data:

In NA Mode, the data processing functions (such as trace math) that are

included in the SNP data depends on a Preference setting. Click

System

, then

Preferences

, then

Preferences

, then scroll to

NA, SNP File Save

, then select

from the following:

Содержание FieldFox A Series





















































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FieldFox A Series

Отзывы:

Похожие инструкции для FieldFox A Series

Бренды по названию

Популярные бренды

Keysight Technologies FieldFox A Series, Руководство пользователя

Результаты поиска

Содержание FieldFox A Series

Отзывы:

Похожие инструкции для FieldFox A Series

Бренды по названию

Популярные бренды