Keysight Technologies EXR Series, Руководство по конфигурации оборудования

Страница: 5 / 34

Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide 5
MultiScope Hardware Configuration, MXR/EXR-Series—At a Glance
You can connect two Infiniium MXR/EXR-Series oscilloscopes together to create
an oscilloscope system with up to 16 channels.
Oscilloscopes
Required
Infiniium MXR/EXR-Series oscilloscopes:
• Each oscilloscope adds eight or four input channels. You can connect two
oscilloscopes in a rack.
• The MultiScope system is synchronized using the AUX OUT signal on the second
( follower #1 ) oscilloscope, power divider, and a synchronization port
(channel 4, for example) on both oscilloscopes.
Expansion
Accessories
For MultiScope systems made up of two MXR/EXR-Series oscilloscopes, this
multi-frame cable kit is available:
• N2124A Multi-Frame Cable Kit for Two MXR/EXR-Series Oscilloscopes.
Not Included
MultiScope systems also require:
• Equipment rack(s).
• Rackmount kits for the oscilloscopes (MXR2RACK for MXR-Series or
EXR2RACK for EXR-Series).
• MultiScope control software.
• Remote interface connection between host computer and the each
oscilloscope in the system (for controlling the individual oscilloscopes and
moving captured data to the host computer).
Ethernet LAN and instrument USB are the most common interface options
used.
MultiScope
Control Software
To control MultiScope systems and analyze captured data, you can use:
• Infiniium oscilloscope software on the Leader oscilloscope. MultiScope
software is now included as a standard feature.
• D9010BSEO Infiniium Offline oscilloscope analysis software on a host
computer. MultiScope software is now included as a standard feature.
This software allows time-synchronized acquisitions for multiple-oscilloscope
systems with very low oscilloscope-to-oscilloscope jitter and drift. This software
can be used to configure, capture, and store real-time voltage signals.