5) Press , , , and then press to open the
DIO Configuration dialogue
.
6) Press and select to specify the
Digital I/O pin number
; the properties of this
pin is what we will configure.
7) Rotate to select the
Input/output function
and press to edit it. Then press
to set the function to
Trigger output
.
8) Rotate to select
Polarity
and press to edit it. Then press to set the polarity
to
Positive
; this will output a positive logic signal.
9) Rotate to select the
Pulse width
of the phase marker output and press to edit it.
Then enter
500 µs
to set the
Pulse width
to
500 µs
.
(1) Press More...
(2) Press I/O
(3) Press DIO
(4) Press Config
11 | Keysight | Sourcing Precise Current/Voltage Sinusoidal Waveforms Using the B2961A/62A – Demo Guide
