Keysight Technologies B1542A Pulsed IV Package, Руководство пользователя

Страница: 32 / 160

2-14 Keysight B1542A User’s Guide, Edition 10
Installation
Hardware Installation
Connecting DC Probes
Only for the DC probe users. Connect the following accessories as shown in Figure
2-10 . Use a torque wrench and an open-end wrench to fasten the SMA connectors.
Required accessories:
• DUT cable, 1.5 m, 2 ea.
• SMA(f)-(m)-(f) adapter, 1 ea.
• 50

Terminator, 1 ea.
• SMA(m)-SSMC cable, 1 ea. (part of the pulsed IV DC probe cable set)
• SMA(f)-SSMC cable, 1 ea. (part of the pulsed IV DC probe cable set)
• SSMC short-open cable, 3 ea. (parts of the pulsed IV DC probe cable set)
50 mm or 75 mm cable length. Use appropriate one. For the external view and
the internal connection, see
Figure 2-11 .
Figure 2-10 DC Probe Connections
Terminator
Well
Gate
Source
Drain
1
2
3
4
5
Gate DC probe
Source DC probe
Signal Signal
Gnd
Gnd
SMA(f)-(m)-(f)
7
6
to Bias-T (RF+DC) or
to Drain pulse/dc switch unit (DUT)
to Divider or
to Gate pulse/dc switch unit (DUT)
DUT cable, 1.5 m
DUT cable, 1.5 m
Drain DC probe
Well DC probe